OpenSSL Missing Ciphers2019 Community Moderator ElectionImplementation of eSTREAM ciphers available?RHEL 6.4: Openssl 1.0.0-27 libcrypto and libssl missingOpenSSL updating ciphers suitesRHEL openssl conflictsHow to block ciphers supported by OpenSSL in OpenSSL's configuration?RHEL6 openssl + httpd confusionHow can I upgrade OpenSSL version to openssl-1.0.1s in RHEL 5 machine?OpenSSL verify: missing flag “-allow_proxy_certs”OpenSSL Padding Oracle vulnerability with latest openssl 1.1.0cWhy is Apache HTTP not offering the best available cipher suite from OpenSSL?

What does chmod -u do?

Evaluating expression with Integer part and Fraction part of a nested radical

If magnesium reacts with oxygen to produce magnesium oxide only on the application of heat, then why isn't it categorised as an endothermic reaction?

How does the math work for Perception checks?

Freedom of speech and where it applies

Non-trope happy ending?

Pre-mixing cryogenic fuels and using only one fuel tank

Does a 'pending' US visa application constitute a denial?

Is there a RAID 0 Equivalent for RAM?

How do you respond to a colleague from another team when they're wrongly expecting that you'll help them?

How to implement a feedback to keep the DC gain at zero for this conceptual passive filter?

Melting point of aspirin, contradicting sources

Does Doodling or Improvising on the Piano Have Any Benefits?

New brakes for 90s road bike

How to create ADT in Haskell?

Creating nested elements dynamically

Explaining alternative travel routes when going to the USA

Are the IPv6 address space and IPv4 address space completely disjoint?

Why is it that I can sometimes guess the next note?

Is Witten's Proof of the Positive Mass Theorem Rigorous?

Did arcade monitors have same pixel aspect ratio as TV sets?

Creepy dinosaur pc game identification

Pre-modern battle - command it, or fight in it?

What is going wrong in this circuit which supposedly should step down AC to arduino friendly voltage?



OpenSSL Missing Ciphers



2019 Community Moderator ElectionImplementation of eSTREAM ciphers available?RHEL 6.4: Openssl 1.0.0-27 libcrypto and libssl missingOpenSSL updating ciphers suitesRHEL openssl conflictsHow to block ciphers supported by OpenSSL in OpenSSL's configuration?RHEL6 openssl + httpd confusionHow can I upgrade OpenSSL version to openssl-1.0.1s in RHEL 5 machine?OpenSSL verify: missing flag “-allow_proxy_certs”OpenSSL Padding Oracle vulnerability with latest openssl 1.1.0cWhy is Apache HTTP not offering the best available cipher suite from OpenSSL?










0















I have two instances of RHEL (6.2 and 6.5) both using the same versions of OpenSSL and OpenSSH (albeit different versions).



Red Hat Enterprise Linux Server release 6.2



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 48.el6_8.1

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 118.1.el6_8

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


Red Hat Enterprise Linux Server release 6.5



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 15.el6

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 94.el6

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


However the output from:



# openssl ciphers


Seems to be different on both servers. The server running 6.5 seems to have more ciphers. I'm not sure whether this is the expected result or if I should see identical output from both.



Red Hat Enterprise Linux Server release 6.2



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:DES-CBC3-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-IDEA-CBC-MD5:KRB5-DES-CBC3-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5


Red Hat Enterprise Linux Server release 6.5



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:DES-CBC3-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-DES-CBC3-MD5:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-IDEA-CBC-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:KRB5-DES-CBC-SHA:KRB5-DES-CBC-MD5:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-KRB5-RC2-CBC-SHA:EXP-KRB5-DES-CBC-SHA:EXP-KRB5-RC2-CBC-MD5:EXP-KRB5-DES-CBC-MD5:EXP-RC4-MD5:EXP-KRB5-RC4-SHA:EXP-KRB5-RC4-MD5









share|improve this question
























  • They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

    – Nasir Riley
    Mar 12 at 21:30












  • Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

    – user2090974
    Mar 12 at 21:35















0















I have two instances of RHEL (6.2 and 6.5) both using the same versions of OpenSSL and OpenSSH (albeit different versions).



Red Hat Enterprise Linux Server release 6.2



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 48.el6_8.1

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 118.1.el6_8

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


Red Hat Enterprise Linux Server release 6.5



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 15.el6

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 94.el6

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


However the output from:



# openssl ciphers


Seems to be different on both servers. The server running 6.5 seems to have more ciphers. I'm not sure whether this is the expected result or if I should see identical output from both.



Red Hat Enterprise Linux Server release 6.2



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:DES-CBC3-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-IDEA-CBC-MD5:KRB5-DES-CBC3-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5


Red Hat Enterprise Linux Server release 6.5



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:DES-CBC3-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-DES-CBC3-MD5:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-IDEA-CBC-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:KRB5-DES-CBC-SHA:KRB5-DES-CBC-MD5:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-KRB5-RC2-CBC-SHA:EXP-KRB5-DES-CBC-SHA:EXP-KRB5-RC2-CBC-MD5:EXP-KRB5-DES-CBC-MD5:EXP-RC4-MD5:EXP-KRB5-RC4-SHA:EXP-KRB5-RC4-MD5









share|improve this question
























  • They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

    – Nasir Riley
    Mar 12 at 21:30












  • Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

    – user2090974
    Mar 12 at 21:35













0












0








0








I have two instances of RHEL (6.2 and 6.5) both using the same versions of OpenSSL and OpenSSH (albeit different versions).



Red Hat Enterprise Linux Server release 6.2



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 48.el6_8.1

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 118.1.el6_8

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


Red Hat Enterprise Linux Server release 6.5



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 15.el6

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 94.el6

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


However the output from:



# openssl ciphers


Seems to be different on both servers. The server running 6.5 seems to have more ciphers. I'm not sure whether this is the expected result or if I should see identical output from both.



Red Hat Enterprise Linux Server release 6.2



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:DES-CBC3-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-IDEA-CBC-MD5:KRB5-DES-CBC3-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5


Red Hat Enterprise Linux Server release 6.5



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:DES-CBC3-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-DES-CBC3-MD5:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-IDEA-CBC-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:KRB5-DES-CBC-SHA:KRB5-DES-CBC-MD5:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-KRB5-RC2-CBC-SHA:EXP-KRB5-DES-CBC-SHA:EXP-KRB5-RC2-CBC-MD5:EXP-KRB5-DES-CBC-MD5:EXP-RC4-MD5:EXP-KRB5-RC4-SHA:EXP-KRB5-RC4-MD5









share|improve this question
















I have two instances of RHEL (6.2 and 6.5) both using the same versions of OpenSSL and OpenSSH (albeit different versions).



Red Hat Enterprise Linux Server release 6.2



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 48.el6_8.1

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 118.1.el6_8

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


Red Hat Enterprise Linux Server release 6.5



# yum info openssl
Installed Packages
Name : openssl
Arch : x86_64
Version : 1.0.1e
Release : 15.el6

# yum info openssh
Installed Packages
Name : openssh
Arch : x86_64
Version : 5.3p1
Release : 94.el6

# openssl version
OpenSSL 1.0.1e-fips 11 Feb 2013

# telnet 0 22
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
SSH-2.0-OpenSSH_5.3


However the output from:



# openssl ciphers


Seems to be different on both servers. The server running 6.5 seems to have more ciphers. I'm not sure whether this is the expected result or if I should see identical output from both.



Red Hat Enterprise Linux Server release 6.2



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:DES-CBC3-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-IDEA-CBC-MD5:KRB5-DES-CBC3-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5


Red Hat Enterprise Linux Server release 6.5



# openssl ciphers ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-DSS-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:EDH-DSS-DES-CBC3-SHA:ECDH-RSA-DES-CBC3-SHA:ECDH-ECDSA-DES-CBC3-SHA:DES-CBC3-SHA:PSK-3DES-EDE-CBC-SHA:KRB5-DES-CBC3-SHA:KRB5-DES-CBC3-MD5:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:DHE-DSS-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-SEED-SHA:DHE-DSS-SEED-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:SEED-SHA:CAMELLIA128-SHA:IDEA-CBC-SHA:PSK-AES128-CBC-SHA:KRB5-IDEA-CBC-SHA:KRB5-IDEA-CBC-MD5:ECDHE-RSA-RC4-SHA:ECDHE-ECDSA-RC4-SHA:ECDH-RSA-RC4-SHA:ECDH-ECDSA-RC4-SHA:RC4-SHA:RC4-MD5:PSK-RC4-SHA:KRB5-RC4-SHA:KRB5-RC4-MD5:EDH-RSA-DES-CBC-SHA:EDH-DSS-DES-CBC-SHA:DES-CBC-SHA:KRB5-DES-CBC-SHA:KRB5-DES-CBC-MD5:EXP-EDH-RSA-DES-CBC-SHA:EXP-EDH-DSS-DES-CBC-SHA:EXP-DES-CBC-SHA:EXP-RC2-CBC-MD5:EXP-KRB5-RC2-CBC-SHA:EXP-KRB5-DES-CBC-SHA:EXP-KRB5-RC2-CBC-MD5:EXP-KRB5-DES-CBC-MD5:EXP-RC4-MD5:EXP-KRB5-RC4-SHA:EXP-KRB5-RC4-MD5






rhel openssl openssh






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Mar 13 at 11:08







user2090974

















asked Mar 12 at 21:16









user2090974user2090974

11




11












  • They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

    – Nasir Riley
    Mar 12 at 21:30












  • Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

    – user2090974
    Mar 12 at 21:35

















  • They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

    – Nasir Riley
    Mar 12 at 21:30












  • Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

    – user2090974
    Mar 12 at 21:35
















They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

– Nasir Riley
Mar 12 at 21:30






They aren't the same and neither are the minor release versions. The output shows that. Is there some reason that you need 6.5 and 6.2? Why not just update them both to 6.10 which is the current minor version and then yum update?

– Nasir Riley
Mar 12 at 21:30














Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

– user2090974
Mar 12 at 21:35





Apologies . I meant the same versions (openssl version 1.0.1e & openssh version 5.3p1) but different releases. I'm not in a position to update both servers unfortunately.

– user2090974
Mar 12 at 21:35










0






active

oldest

votes











Your Answer








StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);

else
createEditor();

);

function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);



);













draft saved

draft discarded


















StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f505964%2fopenssl-missing-ciphers%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes















draft saved

draft discarded
















































Thanks for contributing an answer to Unix & Linux Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid


  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f505964%2fopenssl-missing-ciphers%23new-answer', 'question_page');

);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







-openssh, openssl, rhel

Popular posts from this blog

Creating 100m^2 grid automatically using QGIS?Creating grid constrained within polygon in QGIS?Createing polygon layer from point data using QGIS?Creating vector grid using QGIS?Creating grid polygons from coordinates using R or PythonCreating grid from spatio temporal point data?Creating fields in attributes table using other layers using QGISCreate .shp vector grid in QGISQGIS Creating 4km point grid within polygonsCreate a vector grid over a raster layerVector Grid Creates just one grid

What is this called? Old film camera viewer?What makes a good film camera?What to do with an old film camera?What should one look for when buying a used film camera?What is the value and age of this pre-1967 Ricoh 35 mm camera?DSLR recommendation, question about old Canon 35mm film Camera & lensesCan anyone identify the silver rangefinder-style camera in this advertisement?What kind of a Polaroid 600-camera is this?Will an old film camera still work even when not used in a very long time?What is this camera / Can I develop the film?How to fit an action camera into antique (bellows) housing?What to check when buying used and old film bodies?

Why is this plane circling around the Lucknow airport every day?Why do aircraft on Flight Radar 24 jump around randomly sometimes?What airport has this walkway over a taxiway?How does Chicago O'Hare's tower sequence aircraft at peak capacity?Which airport is featured in this Delta commercial?After a crash, for how long is the airport closed?Can a passenger plane stand still in the air, or hover at a fixed location above a ground?What are those trucks towing around, and why?What is this airport outside of Cairo, Egypt?Which US airport has the lowest circling MDH?What is this airport video?