How to check whether module is loaded with custom configurations?Why is my network interface named enp0s25 instead of eth0?How do I create a system file /etc/modprobe.d/ath9k.conf?`qdbus` returns an error. Ubuntu 18.04How (recipe) to build only one kernel module?Cannot get my N300 (DWA-130) D-link wireless USB to work on Ubuntu 14.04I have a Sony Vaio SVT131Aiil. The wireless does not show up as an option in network managerinstalled ubuntu 16.04 on hp laptop - wifi not workingubuntu 16.04 hotspot. Client has no internetwl module is loaded but not workingwireless ath9k suddenly stopped working on ubuntu 16.04UbuntuStudio will connect to one of two routersASUS laptop - wifi not connecting after upgrading to 18.04Kernel can't see Atheros Communications Inc. AR9462 Wireless Network Adapter
I can't die. Who am I?
Virginia employer terminated employee and wants signing bonus returned
PTIJ: Why does only a Shor Tam ask at the Seder, and not a Shor Mu'ad?
What do you call someone who likes to pick fights?
What's the 'present simple' form of the word "нашла́" in 3rd person singular female?
What stops an assembly program from crashing the operating system?
Determining optimum shared school bus route to a single destination from multiple origin points
Signed and unsigned numbers
What is better: yes / no radio, or simple checkbox?
Confusion about Complex Continued Fraction
Why does Central Limit Theorem break down in my simulation?
How does Ehrenfest's theorem apply to the quantum harmonic oscillator?
How do we create new idioms and use them in a novel?
Can I use a violin G string for D?
Is it safe to abruptly remove Arduino power?
Why do phishing e-mails use faked e-mail addresses instead of the real one?
How to write a chaotic neutral protagonist and prevent my readers from thinking they are evil?
How can I manipulate the output of Information?
Has a sovereign Communist government ever run, and conceded loss, on a fair election?
Power Strip for Europe
Source permutation
Is it a Cyclops number? "Nobody" knows!
Is it possible to avoid unpacking when merging Association?
How many characters using PHB rules does it take to be able to have access to any PHB spell at the start of an adventuring day?
How to check whether module is loaded with custom configurations?
Why is my network interface named enp0s25 instead of eth0?How do I create a system file /etc/modprobe.d/ath9k.conf?`qdbus` returns an error. Ubuntu 18.04How (recipe) to build only one kernel module?Cannot get my N300 (DWA-130) D-link wireless USB to work on Ubuntu 14.04I have a Sony Vaio SVT131Aiil. The wireless does not show up as an option in network managerinstalled ubuntu 16.04 on hp laptop - wifi not workingubuntu 16.04 hotspot. Client has no internetwl module is loaded but not workingwireless ath9k suddenly stopped working on ubuntu 16.04UbuntuStudio will connect to one of two routersASUS laptop - wifi not connecting after upgrading to 18.04Kernel can't see Atheros Communications Inc. AR9462 Wireless Network Adapter
In the answer by Chili555 for How do I create a system file /etc/modprobe.d/ath9k.conf? it is shown that you can create a config file for a kernel module . Now the question is how do I verify that the options set in that config file have taken effect after sudo modprobe ath9k ?
Specific option that I am trying to check is ps_enable. However, doing the following
$ modinfo ath9k | grep ps_enable
parm: ps_enable:Enable WLAN PowerSave (int)
only explains what the parameter is and not its current value.
networking drivers configuration system
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
add a comment |
In the answer by Chili555 for How do I create a system file /etc/modprobe.d/ath9k.conf? it is shown that you can create a config file for a kernel module . Now the question is how do I verify that the options set in that config file have taken effect after sudo modprobe ath9k ?
Specific option that I am trying to check is ps_enable. However, doing the following
$ modinfo ath9k | grep ps_enable
parm: ps_enable:Enable WLAN PowerSave (int)
only explains what the parameter is and not its current value.
networking drivers configuration system
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
add a comment |
In the answer by Chili555 for How do I create a system file /etc/modprobe.d/ath9k.conf? it is shown that you can create a config file for a kernel module . Now the question is how do I verify that the options set in that config file have taken effect after sudo modprobe ath9k ?
Specific option that I am trying to check is ps_enable. However, doing the following
$ modinfo ath9k | grep ps_enable
parm: ps_enable:Enable WLAN PowerSave (int)
only explains what the parameter is and not its current value.
networking drivers configuration system
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
In the answer by Chili555 for How do I create a system file /etc/modprobe.d/ath9k.conf? it is shown that you can create a config file for a kernel module . Now the question is how do I verify that the options set in that config file have taken effect after sudo modprobe ath9k ?
Specific option that I am trying to check is ps_enable. However, doing the following
$ modinfo ath9k | grep ps_enable
parm: ps_enable:Enable WLAN PowerSave (int)
only explains what the parameter is and not its current value.
networking drivers configuration system
networking drivers configuration system
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
edited 3 hours ago
Sergiy Kolodyazhnyy
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
asked 4 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
73.9k9154323
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Apparently such information is contained within /sys filesystem. According to Gilles's answer on the relevant post, in order to find the driver in use by interface you would execute
readlink /sys/class/net/wlan0/device/driver
which would provide the relative path as in
../../../../bus/pci/drivers/ath5k
In my case due to systemd and predictive interface naming, the interface is named differently and produces
$ readlink /sys/class/net/wlp2s0/device/driver
../../../../bus/pci/drivers/ath9k
The resulting directory path contains subdirectories module/parameters/ where there will be files for each parameter containing their current value. Thus, if I edit the /etc/modprobe/ath9k.conf file and reinsert the module, the result is as follows:
# After editing the conf file to set parameter to 1
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
1
# after editing the file and setting parameter to 0
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
0
The command can be combined as well.
$ cat "$(readlink -f /sys/class/net/wlp2s0/device/driver/)"/module/parameters/ps_enable
0
If you do have desktop environment and dbus running, as well as qdbus or dbus-send installed, such information can be queried via Network Manager's dbus interface ( though it requires figuring out the object path of each individual device, and probably would be better written in Python or C )
$ qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager/Devices/14 org.freedesktop.NetworkManager.Device.Driver
ath9k
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "89"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1124641%2fhow-to-check-whether-module-is-loaded-with-custom-configurations%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Apparently such information is contained within /sys filesystem. According to Gilles's answer on the relevant post, in order to find the driver in use by interface you would execute
readlink /sys/class/net/wlan0/device/driver
which would provide the relative path as in
../../../../bus/pci/drivers/ath5k
In my case due to systemd and predictive interface naming, the interface is named differently and produces
$ readlink /sys/class/net/wlp2s0/device/driver
../../../../bus/pci/drivers/ath9k
The resulting directory path contains subdirectories module/parameters/ where there will be files for each parameter containing their current value. Thus, if I edit the /etc/modprobe/ath9k.conf file and reinsert the module, the result is as follows:
# After editing the conf file to set parameter to 1
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
1
# after editing the file and setting parameter to 0
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
0
The command can be combined as well.
$ cat "$(readlink -f /sys/class/net/wlp2s0/device/driver/)"/module/parameters/ps_enable
0
If you do have desktop environment and dbus running, as well as qdbus or dbus-send installed, such information can be queried via Network Manager's dbus interface ( though it requires figuring out the object path of each individual device, and probably would be better written in Python or C )
$ qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager/Devices/14 org.freedesktop.NetworkManager.Device.Driver
ath9k
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
add a comment |
Apparently such information is contained within /sys filesystem. According to Gilles's answer on the relevant post, in order to find the driver in use by interface you would execute
readlink /sys/class/net/wlan0/device/driver
which would provide the relative path as in
../../../../bus/pci/drivers/ath5k
In my case due to systemd and predictive interface naming, the interface is named differently and produces
$ readlink /sys/class/net/wlp2s0/device/driver
../../../../bus/pci/drivers/ath9k
The resulting directory path contains subdirectories module/parameters/ where there will be files for each parameter containing their current value. Thus, if I edit the /etc/modprobe/ath9k.conf file and reinsert the module, the result is as follows:
# After editing the conf file to set parameter to 1
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
1
# after editing the file and setting parameter to 0
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
0
The command can be combined as well.
$ cat "$(readlink -f /sys/class/net/wlp2s0/device/driver/)"/module/parameters/ps_enable
0
If you do have desktop environment and dbus running, as well as qdbus or dbus-send installed, such information can be queried via Network Manager's dbus interface ( though it requires figuring out the object path of each individual device, and probably would be better written in Python or C )
$ qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager/Devices/14 org.freedesktop.NetworkManager.Device.Driver
ath9k
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
add a comment |
Apparently such information is contained within /sys filesystem. According to Gilles's answer on the relevant post, in order to find the driver in use by interface you would execute
readlink /sys/class/net/wlan0/device/driver
which would provide the relative path as in
../../../../bus/pci/drivers/ath5k
In my case due to systemd and predictive interface naming, the interface is named differently and produces
$ readlink /sys/class/net/wlp2s0/device/driver
../../../../bus/pci/drivers/ath9k
The resulting directory path contains subdirectories module/parameters/ where there will be files for each parameter containing their current value. Thus, if I edit the /etc/modprobe/ath9k.conf file and reinsert the module, the result is as follows:
# After editing the conf file to set parameter to 1
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
1
# after editing the file and setting parameter to 0
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
0
The command can be combined as well.
$ cat "$(readlink -f /sys/class/net/wlp2s0/device/driver/)"/module/parameters/ps_enable
0
If you do have desktop environment and dbus running, as well as qdbus or dbus-send installed, such information can be queried via Network Manager's dbus interface ( though it requires figuring out the object path of each individual device, and probably would be better written in Python or C )
$ qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager/Devices/14 org.freedesktop.NetworkManager.Device.Driver
ath9k
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
Apparently such information is contained within /sys filesystem. According to Gilles's answer on the relevant post, in order to find the driver in use by interface you would execute
readlink /sys/class/net/wlan0/device/driver
which would provide the relative path as in
../../../../bus/pci/drivers/ath5k
In my case due to systemd and predictive interface naming, the interface is named differently and produces
$ readlink /sys/class/net/wlp2s0/device/driver
../../../../bus/pci/drivers/ath9k
The resulting directory path contains subdirectories module/parameters/ where there will be files for each parameter containing their current value. Thus, if I edit the /etc/modprobe/ath9k.conf file and reinsert the module, the result is as follows:
# After editing the conf file to set parameter to 1
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
1
# after editing the file and setting parameter to 0
$ sudo sh -c 'modprobe -r ath9k ; sleep 3; modprobe ath9k'
$ sudo cat /sys/class/net/wlp2s0/device/driver/../../../../bus/pci/drivers/ath9k/module/parameters/ps_enable
0
The command can be combined as well.
$ cat "$(readlink -f /sys/class/net/wlp2s0/device/driver/)"/module/parameters/ps_enable
0
If you do have desktop environment and dbus running, as well as qdbus or dbus-send installed, such information can be queried via Network Manager's dbus interface ( though it requires figuring out the object path of each individual device, and probably would be better written in Python or C )
$ qdbus --system org.freedesktop.NetworkManager /org/freedesktop/NetworkManager/Devices/14 org.freedesktop.NetworkManager.Device.Driver
ath9k
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
edited 3 hours ago
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
answered 3 hours ago
Sergiy KolodyazhnyySergiy Kolodyazhnyy
73.9k9154323
73.9k9154323
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1124641%2fhow-to-check-whether-module-is-loaded-with-custom-configurations%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
-configuration, drivers, networking, system
